C1524/24 Motor Terminal Voltage Malfunction
Diagnostic trouble codes · Vehicles built from Nov 2005
Also covers:
- C1555/25 Motor Relay Welding Failure
DESCRIPTION
The power steering ECU supplies the current to the power steering motor through the motor circuit.| DTC No. |
DTC Detection Condition |
Trouble Area |
| C1524/24 |
Short (or open) in motor circuit or abnormal voltage or current in motor circuit |
|
| C1555/25 |
Motor relay circuit malfunction |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. READ VALUE USING INTELLIGENT TESTER (MOTOR VOLTAGE) |
Connect the intelligent tester to the DLC3.
With the engine running, press the intelligent tester main switch ON.
Select the items "Motor Terminal Volt (U)", "Motor Terminal Volt (V)", "Motor Terminal Volt (W)" in the Data List and read the value displayed on the intelligent tester.
Power steering ECU Item
Item Description: Range (Display)
Inspection Condition
Reference Value
Motor Terminal Volt (U)
Motor terminal voltage (U phase):
Min.: 0 V
Max.: 64 V
Engine running and steering wheel turned
When the steering wheel is turned, a voltage between 1 V and approximately 1 V less than the battery voltage is displayed.
Motor Terminal Volt (V)
Motor terminal voltage (V phase):
Min.: 0 V
Max.: 64 V
Engine running and steering wheel turned
When the steering wheel is turned, a voltage between 1 V and approximately 1 V less than the battery voltage is displayed.
Motor Terminal Volt (W)
Motor terminal voltage (W phase):
Min.: 0 V
Max.: 64 V
Engine running and steering wheel turned
When the steering wheel is turned, a voltage between 1 V and approximately 1 V less than the battery voltage is displayed.
Result Result
Proceed to
When the steering wheel is turned, a voltage between 1 V and approximately 1 V less than the battery voltage is displayed.
A
When the steering wheel is turned, a value other than the above is displayed.
B
|
|
||||
| A | ||
| ||
