C1528/12 Motor Rotation Angle Sensor Malfunction
Diagnostic trouble codes · Vehicles built from Nov 2005
DESCRIPTION
The motor rotation angle sensor detects the motor rotation angle and sends this information to the power steering ECU.| DTC No. |
DTC Detection Condition |
Trouble Area |
| C1528/12 |
Motor rotation angle sensor malfunction |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK CONNECTOR CONNECTION CONDITION |
Check the installation condition of the motor rotation angle sensor connector.
- OK:
- Motor rotation angle sensor connector is securely connected to the power steering ECU.
Result Result
Proceed to
NG
A
OK
B
|
|
||||
| A | |
| 2. RECONFIRM DTC |
Securely connect the motor rotation angle sensor connector.
Check for DTC.
- OK:
- DTC is not output.
Result Result
Proceed to
DTC is output
A
DTC is not output
B
|
|
||||
| A | |
| 3. READ VALUE USING INTELLIGENT TESTER (MOTOR ROTATION ANGLE SENSOR) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and press the intelligent tester main switch ON.
Select the items "Motor Rotation Angle" in the Data List and read the value displayed on the intelligent tester.
Power steering ECU Item
Item Description: Range (Display)
Inspection Condition
Reference Value
Motor Rotation Angle
Motor Rotation Angle:
Min.: 0°
Max.: 360°
Power steering in operation
During steering operation, motor rotation angle value changes from 0 to 360°
- OK:
- During steering operation, motor rotation angle value changes from 0 to 360°.
|
|
||||
| OK | ||
| ||
