INSTALLATION
Removal / installation · Vehicles built from Nov 2005
- HINT:
- Use the same procedures for the RH and LH sides.
- The procedures listed below are for the LH side.
- Use the same procedures for the RH and LH sides.
| 1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH |
Install the headlight washer actuator with the 2 screws.

| 2. INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH |
![]() ![]() |
Attach the 2 claws to install the headlight washer nozzle.
| 3. INSTALL HEADLIGHT CLEANER HOSE |
Attach the 8 clips to install the hose to the front bumper.

| 4. INSTALL FRONT BUMPER COVER |
Put protective tape under the front fender and headlight.

Install the 4 clips.
Install the hood cushion center.

w/ Headlight Cleaner:
Connect the headlight cleaner.
w/ Fog Light:
Connect the 2 fog light connectors.
Attach the 4 claws to install the bumper cover.

Install the 8 screws.

| 5. INSTALL RADIATOR SUPPORT OPENING COVER |
Install the 2 clips.

| 6. INSTALL FRONT FENDER LINER LH |
Install the fender liner with the clip and fender liner retainer.

w/ Splash Shield:
Install the front fender splash shield LH.
Install the screw, nut and bolt.
| 7. INSTALL FRONT FENDER LINER RH |
- HINT:
- Use the same procedures described for the LH side.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |

