2005-2008 RAV4 · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jan 2007

Versions by build date: Nov 2005 – Dec 2006 from Jan 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE NO. 1 CONSOLE UPPER PANEL GARNISH

B139541
  1. Using a screwdriver, detach the 4 clips and upper panel garnish.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE NO. 2 CONSOLE UPPER PANEL GARNISH

B139542
  1. Using a screwdriver, detach the 4 clips and upper panel garnish.

    HINT:
    Tape the screwdriver tip before use.


4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

B129883
  1. Remove the shift lever knob.

  1. for Manual Transaxle:
    Using a screwdriver, detach the 2 clips, 4 claws and remove the upper console panel.

    HINT:
    Tape the screwdriver tip before use.

  1. for Automatic Transaxle:
    Using a screwdriver, detach the 2 clips, 4 claws and remove the upper console panel then disconnect the connector.

    HINT:
    Tape the screwdriver tip before use.


6. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

B129880
  1. Using a screwdriver, detach the 4 clips.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect the connector and remove the upper rear console panel.


7. REMOVE CENTER POWER OUTLET SOCKET ASSEMBLY

E003722
  1. Rotate the socket to disengage the notch.

  1. B108949
    Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the cover.

  1. Remove the socket from the cover.

← REMOVAL (Nov 2005 – Dec 2006)INSTALLATION (Nov 2005 – Dec 2006) →