REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. DRAIN ENGINE COOLANT |
| 3. REMOVE EXHAUST PIPE SUB-ASSEMBLY |
Remove the 2 nuts, bolt and exhaust pipe.


| 4. REMOVE HEATER ASSEMBLY |
Disconnect the connectors.
Disconnect the heater hoses.
Disconnect the fuel hose.
Remove the 2 bolts, 2 nuts and heater.


| 5. REMOVE HEATER PUMP ASSEMBLY |
Disconnect the fuel hoses.
Remove the nut and heater pump.


| 6. REMOVE WATER PIPE AND HOSE SUB-ASSEMBLY |
Disconnect the heater hoses.
Remove the nut, bolt and water pipe and hose.


