2005-2008 RAV4 · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Aug 2007


1. REMOVE ENGINE ASSEMBLY
  1. Remove the engine (Click here).


2. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH

  1. A136828E01
    Remove the 6 bolts and front NO. 1 engine mounting bracket LH.


3. REMOVE WATER INLET HOUSING

  1. A132442E01
    Disconnect the water hose.

  1. Remove the 2 bolts, nut and water inlet housing.

  1. A132443
    Remove the water inlet housing No. 1 gasket and water outlet pipe O-ring.


4. REMOVE CRANKSHAFT PULLEY

  1. A132066E01
    Using SST, loosen the crankshaft pulley set bolt.
    SST
    09213-70011   (09213-70020)
    09330-00021  

  1. A132067E01
    Using the pulley set bolt and SST, remove the crankshaft pulley.
    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05020, 09954-05021)


5. REMOVE WATER PUMP PULLEY

  1. A132444E01
    Using SST, hold the water pump pulley.
    SST
    09960-10010   (09962-01000, 09963-00700)

  1. Remove the 4 bolts and water pump pulley.


6. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

  1. A132445
    Remove the bolt, No. 2 idler pulley cover plate and No. 2 idler pulley.


7. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

  1. A138913
    Remove the 5 bolts and V-ribbed belt tensioner assembly.


8. REMOVE WATER PUMP ASSEMBLY

  1. A132448
    Remove the 16 bolts, water pump and water pump gasket.

← COMPONENTS (from Aug 2007)INSPECTION (from Aug 2007) →