REMOVAL
Removal / installation · Vehicles built from Aug 2007
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE BATTERY CLAMP SUB-ASSEMBLY |
Remove the bolt and loosen the nut.

Detach the 2 wire harness clamps.
Detach the hook of the battery clamp from the front battery bracket, and then remove the battery clamp.
| 3. REMOVE BATTERY |
Remove the battery and battery insulator.
| 4. REMOVE FRONT BATTERY BRACKET |
Detach the 2 wire harness clamps.

Remove the 4 bolts and front bracket.
| 5. REMOVE BATTERY BRACKET REINFORCEMENT |
Remove the 2 bolts and bracket reinforcement.

| 6. REMOVE STARTER ASSEMBLY |
Disconnect the starter connector.

Open the terminal cap, remove the nut and disconnect the starter wire.
Remove the 2 bolts and starter.

