2005-2008 RAV4 · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2007


1. REMOVE REPAIR SERVICE STARTER KIT

  1. A079718E09
    Remove the nut and disconnect the lead wire from the terminal C.

  1. A079719E01
    Remove the 2 screws holding the repair service starter kit from the starter drive housing assembly.

  1. Remove the repair service starter kit.

  1. Remove the return spring and plunger from the repair service starter kit.


2. REMOVE STARTER YOKE ASSEMBLY

  1. A079720E01
    Remove the 2 through-bolts, and pull out the starter yoke assembly together with the starter commutator end frame assembly.


3. REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY

  1. A079721E01
    Remove the starter commutator end frame assembly from the starter yoke assembly.


4. REMOVE STARTER ARMATURE PLATE

  1. A079722E01
    Remove the starter armature plate from the starter yoke assembly.


5. REMOVE STARTER COMMUTATOR END FRAME COVER

  1. A079723E01
    Using a screwdriver, remove the starter commutator end frame cover.


6. REMOVE STARTER ARMATURE ASSEMBLY

  1. A082440E03
    Using snap ring pliers, remove the snap ring and plate washer.

    NOTICE:
    Do not drop the starter armature assembly.

  1. Remove the starter armature assembly from the starter commutator end frame assembly.


7. REMOVE PLANETARY GEAR

  1. A081167E01
    Remove the 3 planetary gears from the starter drive housing assembly.

← REMOVAL (from Aug 2007)INSPECTION (from Aug 2007) →