2005-2008 RAV4 · Service Manual
BODY ELECTRICAL
Home
›
BODY ELECTRICAL
› LIGHTING › STOP LIGHT CONTROL RELAY
INSTALLATION
Removal / installation
·
Vehicles built from Aug 2008
1. INSTALL STOP LIGHT CONTROL RELAY ASSEMBLY
Connect the connector.
Attach the clip to install the relay.
2. INSTALL COWL SIDE TRIM BOARD RH
HINT:
Use the same procedures described for the LH side.
3. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE RH
HINT:
Use the same procedures described for the LH side.
← INSPECTION (from Aug 2008)
ON-VEHICLE INSPECTION (from Nov 2005) →