2005-2008 RAV4 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2008


1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER
  1. Install the stop light switch mounting adjuster to the pedal support.


2. INSTALL STOP LIGHT SWITCH ASSEMBLY

  1. F049043E07
    Install the stop light switch to the adjuster until it slightly touches the brake pedal.

    NOTICE:
    Do not depress the brake pedal.

  1. F049044E19
    Turn the stop light switch clockwise to install it.

    NOTICE:
    Do not depress the brake pedal.

    Torque:
    1.5 N*m{ 15 kgf*cm , 13 in.*lbf }

  1. Check the stop light switch clearance.

    Stop light switch clearance:
    1.5 to 2.5 mm (0.0590 to 0.0984 in.)

  1. Connect the connector to the stop light switch.

← INSPECTION (from Aug 2008)COMPONENTS (from Nov 2005) →