INSPECTION
Inspection · Vehicles built from Aug 2008
| INSPECT STOP LIGHT SWITCH ASSEMBLY (w/o Stop Light Control Relay) |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 - 2
Pin pushed
10 kΩ higher
Pin released
Below 1 Ω
3 - 4
Pin pushed
Below 1 Ω
Pin released
10 kΩ higher
| INSPECT STOP LIGHT SWITCH ASSEMBLY (w/ Stop Light Control Relay) |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 - 2
Pin pushed
10 kΩ higher
Pin released
Below 1 Ω
3 - 4
Pin pushed
Below 1 Ω
Pin released
10 kΩ higher
