INSTALLATION
Removal / installation · Vehicles built from Aug 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| 1.
INSTALL REAR BUMPER SIDE MOULDING SUB-ASSEMBLY LH (for Wide Body) |
 |
Attach the 5 clips to install the side moulding.
Install the screw.
| 2.
INSTALL REAR BUMPER SIDE MOULDING SUB-ASSEMBLY RH (for Wide Body) |
 |
- HINT:
- Use the procedure described for the LH side.
| 3.
INSTALL REFLEX REFLECTOR ASSEMBLY LH |
 |
Install the reflex reflector with the screw.
| 4.
INSTALL REFLEX REFLECTOR ASSEMBLY RH |
 |
- HINT:
- Use the procedure described for the LH side.
| 5.
INSTALL LICENSE PLATE LIGHT ASSEMBLY (w/ License Plate Light)
|
 |
Install the light as shown in the illustration.
Connect the connector.
| 6.
INSTALL REAR NO. 1 BUMPER PLATE (w/ License Plate Light) |
 |
Attach the 3 guides and 7 clips to install the bumper plate.
| 7.
INSTALL REAR BUMPER UPPER RETAINER LH |
 |
Attach the claw to install the upper retainer.
Install the screw.
| 8.
INSTALL REAR BUMPER UPPER RETAINER RH |
 |
- HINT:
- Use the procedure described for the LH side.
| 9.
INSTALL REAR BUMPER SIDE SUPPORT LH |
 |
Attach the claw to install the side support.
Install the 2 screws.
| 10.
INSTALL REAR BUMPER SIDE SUPPORT RH |
 |
- HINT:
- Use the procedure described for the LH side.
| 11.
INSTALL REAR NO. 1 BUMPER REINFORCEMENT |
 |
Install the bumper reinforcement with the 6 bolts.
-
Torque:
- 37 N*m{
377 kgf*cm
, 27 ft.*lbf
}
| 12.
INSTALL REAR BUMPER COVER |
 |
Attach the 12 claws to install the bumper cover.
- Install the 7 screws and 7 clips.