POWER WINDOW CONTROL SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
| |||||
| 3.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM* |
Using the intelligent tester, inspect the LIN communication function to ensure there are no malfunctions in the communication system.
| Result | Proceed to |
| No DTCs output | A |
| DTCs output | B |
|
| ||||
| |||||
| 4.PROBLEM SYMPTOMS TABLE |
| Result | Proceed to |
| Fault not listed in problem symptoms table | A |
| Fault listed in problem symptoms table | B |
|
| ||||
| |||||
| 5.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Operation Check (Click here).
Terminals of ECU (Click here).
Data List / Active Test (Click here).
| |||||
| 6.ADJUST, REPAIR OR REPLACE |
| |||||
| 7.CONFIRMATION TEST |
| |||||
| 8.RESET POWER WINDOW MOTOR |
If the power window master switch AUTO light is blinking, reset the power window motor (Click here).
|
| ||||
|---|---|---|---|---|---|