Home
›
STEERING
›
POWER STEERING
›
POWER STEERING ECU (for LHD)
POWER STEERING ECU (for LHD) > REMOVAL
for Preparation
Click here
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable SRS system.
2. REMOVE UPPER INSTRUMENT PANEL
Remove the instrument panel (
Click here
).
3. REMOVE POWER STEERING ECU
Disconnect the 4 connectors.
Remove the 3 nuts and ECU.