Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM

DTC    C1201    Engine Control System Malfunction

for Preparation Click here


DESCRIPTION

If a malfunction in the engine control system is detected, the operation of VSC and TRC is prohibited by the fail-safe function. When the signals from the engine are input normally, the fail-safe control is canceled and the DTC is not stored.

DTC Code
DTC Detection Condition
Trouble Area
C1201
Engine control system malfunction signal continues for 1 second or more.
Engine control system

INSPECTION PROCEDURE

1.CHECK ENGINE CONTROL SYSTEM
  1. Check if any engine control system DTC is output.

    HINT:
    1. for 2AD-FHV: Click here.
    2. for 2AD-FTV (for DPF): Click here.
    3. for 2AD-FTV (for CCo): Click here.

    Result:
    Result
    Proceed to
    DTC is not output.
    for 2AD-FHV
    A
    for 2AD-FTV
    B
    DTC is output.
    for 2AD-FHV
    C
    for 2AD-FTV (for DPF)
    D
    for 2AD-FTV (for CCo)
    E



B
REPLACE ECM (Click here)

C
INSPECT ENGINE CONTROL SYSTEM (for DTC) (Click here)

D
INSPECT ENGINE CONTROL SYSTEM (for DTC) (Click here)

E
INSPECT ENGINE CONTROL SYSTEM (for DTC) (Click here)
A

REPLACE ECM (Click here)