FRONT CRANKSHAFT OIL SEAL > INSTALLATION |
| 1. INSTALL FRONT CRANKSHAFT OIL SEAL |
Apply MP grease to the lip of a new oil seal.
![]() |
Using SST and a hammer, tap in the oil seal as shown in the illustration.
| 2. INSTALL CRANKSHAFT PULLEY |
Align the keyway of the pulley with the key located on the crankshaft, then slide the pulley into place.
![]() |
Using SST, install the pulley bolt.
| 3. INSTALL FAN AND GENERATOR V BELT |
Install the fan and generator V belt (Click here).