Home › ENGINE ยท 2AD-FHV › ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL

FRONT CRANKSHAFT OIL SEAL > REMOVAL

for Preparation Click here



1. REMOVE FAN AND GENERATOR V BELT
  1. Remove the fan and generator V belt (Click here).



2. REMOVE CRANKSHAFT PULLEY


    A202323E01
  1. Using SST, hold the crankshaft pulley and loosen the pulley bolt.

    SST
    09213-58014   (91551-80840)
    09330-00021  



    A202324E01
  1. Using SST, remove the pulley bolt and crankshaft pulley.

    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05020, 09954-05021)



3. REMOVE FRONT CRANKSHAFT OIL SEAL


    A202325
  1. Using a screwdriver, pry out the oil seal.

    HINT:
    Tape the screwdriver tip before use.

    NOTICE:
    Be careful not to damage the crankshaft.