FRONT PASSENGER AIRBAG ASSEMBLY > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
| 3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY |
Detach the wire harness clamp from bracket.
![]() |
Disconnect the connector from the airbag.
Remove the 2 bolts from the reinforcement.
Remove the instrument panel upper (Click here).
![]() |
Release the front side airbag door from the front side hook by slightly bending it and lift out the front passenger airbag rearward.
Release the rear side airbag door from the other hook and remove the front passenger airbag.