SLIDING ROOF HOUSING > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE ROOF HEADLINING ASSEMBLY (for Short Body) |
Remove the roof headlining (Click here).
| 3. REMOVE ROOF HEADLINING ASSEMBLY (for Long Body) |
Remove the roof headlining (Click here).
| 4. REMOVE SLIDING ROOF SIDE GARNISH LH |
![]() |
Using a screwdriver, detach the claws and remove the garnish.
| 5. REMOVE SLIDING ROOF SIDE GARNISH RH |
| 6. REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY |
![]() |
Using a T25 "TORX" driver, remove the 4 screws and glass.
Pull the glass upward to remove it.
| 7. REMOVE SLIDING ROOF WEATHERSTRIP |
| 8. DISCONNECT SLIDING ROOF DRAIN HOSE |
Disconnect the 4 drain hoses.
| 9. REMOVE SLIDING ROOF HOUSING ASSEMBLY |
![]() |
Remove the 4 bolts, 8 nuts and housing.