Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM (w/ Entry and Start System)

ENGINE IMMOBILISER SYSTEM (w/ Entry and Start System) > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC


    B127990E01
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) and turn the intelligent tester ON.

  3. Select the following menu items: Body / Entry&Start/ DTC.

  4. Check DTCs and then write them down.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

  5. Confirm the details of the DTCs (Click here).


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) (do not start the engine) and turn the intelligent tester ON.

  3. Select the following menu items: Body / Entry&Start / DTC / Clear.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

  4. Erase DTCs by pressing the YES button on the tester.

    HINT:
    Refer to the intelligent tester operator's manual for further details.