Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System)

ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System) > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.


Engine immobiliser system: 
Symptom
Suspected Area
See page
Engine does not start
ECU power source circuit
Click here
ECD system (2AD-FHV)
Click here
ECD system (2AD-FTV for CCo)
Click here
ECD system (2AD-FTV for DPF)
Click here
Security indicator light malfunction
Clock sub-assembly*1
Click here
Heater control panel*2
Click here
Transponder key ECU
Click here
  1. *1: for Manual Air Conditioning System
  2. *2: for Automatic Air Conditioning System