Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System)

DTC    B2795    Unmatched Key Code

for Preparation Click here


DESCRIPTION

This DTC is output when a key code that has not been registered in the transponder key ECU is inserted into the ignition key cylinder.

DTC Code
DTC Detection
Trouble Area
B2795
Key with unregistered key code is inserted
key

INSPECTION PROCEDURE

1.REREGISTER KEY
  1. Clear the DTC (Click here).

  1. Reregister the key code with the transponder key ECU.

  1. Check that the engine starts with the key.

    OK:
    Engine starts.



NG
REPLACE KEY
OK

END