Home › ENGINE ยท 2AD-FTV › EXHAUST › EXHAUST MANIFOLD

EXHAUST MANIFOLD > REMOVAL

for Preparation Click here



1. REMOVE EGR COOLER WITH PIPE ASSEMBLY
  1. Remove the EGR cooler with pipe assembly (Click here).



2. REMOVE TURBO OIL OUTLET PIPE


    A197523E01
  1. Remove the 2 nuts, 2 bolts, turbo oil outlet pipe and 2 gaskets.
    Text in Illustration 
    *1
    Nut



3. REMOVE NO. 1 TURBO INSULATOR


    A197524
  1. Remove the 2 bolts and No. 1 turbo insulator.



4. DISCONNECT NO. 3 WATER BY-PASS HOSE


A197526


5. REMOVE NO. 5 WATER BY-PASS PIPE


    A197525
  1. Remove the 2 bolts and No. 5 water by-pass pipe.



6. REMOVE NO. 2 TURBO OIL PIPE


    A197527E01
  1. Disconnect the vacuum hose.

  1. Remove the 2 union bolts, 2 gaskets and No. 2 turbo oil pipe.



7. REMOVE TURBOCHARGER STAY


    A197528E01
  1. Remove the 2 nuts, turbocharger stay and 2 collars.
    Text in Illustration 
    *1
    Turbocharger Stay
    *2
    Collar

    NOTICE:
    Do not reuse the turbocharger stay.



8. REMOVE TURBOCHARGER SUB-ASSEMBLY


    A197529
  1. Disconnect the vacuum hose.

  1. Remove the 3 nuts, turbocharger and gasket.



9. REMOVE EXHAUST MANIFOLD


    A206346E01
  1. Remove the 8 nuts, 8 collars, exhaust manifold and gasket.



10. REPLACE STUD BOLT


    A201832E01
  1. Replace the stud bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }