Home › ENGINE ยท 2AD-FTV › EMISSION CONTROL › EGR COOLER

EGR COOLER > REMOVAL

for Preparation Click here



1. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
  1. for CCo:
    Remove the exhaust manifold converter sub-assembly (Click here).

  1. for DPF:
    Remove the exhaust manifold converter sub-assembly (Click here).



2. REMOVE NO. 2 WATER BY-PASS HOSE


A197507


3. REMOVE EGR COOLER WITH PIPE ASSEMBLY


    A197511
  1. Disconnect the vacuum hose.



    A197510E01
  1. Remove the 6 bolts, 2 nuts and EGR cooler with pipe.
    Text in Illustration 
    *1
    Nut

  1. Remove the gasket from the No. 1 EGR pipe and the gasket from the EGR cooler.



    A201869
  1. Remove the O-ring from the EGR cooler.



4. REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY


    A197512E01
  1. Remove the 2 bolts, 2 nuts, No. 1 EGR pipe and gasket.
    Text in Illustration 
    *1
    Nut



5. REMOVE NO. 2 EGR VALVE ASSEMBLY


    A201872
  1. Remove the No. 2 EGR valve and gasket from the EGR cooler.