Home › ENGINE ยท 2AD-FHV › INTAKE › TURBOCHARGER

TURBOCHARGER > REMOVAL

for Preparation Click here



1. REMOVE EGR COOLER WITH PIPE ASSEMBLY
  1. Remove the EGR cooler with pipe assembly (Click here).



2. REMOVE TURBO OIL OUTLET PIPE


    A197523E01
  1. Remove the 2 nuts, 2 bolts, turbo oil outlet pipe and 2 gaskets.
    Text in Illustration 
    *1
    Nut



3. REMOVE NO. 1 TURBO INSULATOR


    A197524
  1. Remove the 2 bolts and No. 1 turbo insulator.



4. REMOVE NO. 1 TURBO WATER PIPE SUB-ASSEMBLY (for Manual Transaxle)


    A197531
  1. Remove the union bolt, gasket and No. 1 turbo water pipe.



5. DISCONNECT NO. 3 WATER BY-PASS HOSE


A197526


6. REMOVE NO. 2 TURBO WATER PIPE SUB-ASSEMBLY (for Manual Transaxle)


    A197532E01
  1. Remove the union bolt and gasket.
    Text in Illustration 
    *1
    Union Bolt

  1. Remove the bolt and No. 2 turbo water pipe.



7. REMOVE NO. 5 WATER BY-PASS PIPE (for Automatic Transaxle)


    A197525
  1. Remove the 2 bolts and No. 5 water by-pass pipe.



8. REMOVE NO. 2 TURBO OIL PIPE


    A197527E01
  1. Disconnect the vacuum hose.

  1. Remove the 2 union bolts, 2 gaskets and No. 2 turbo oil pipe.



9. REMOVE TURBOCHARGER STAY


    A197528E01
  1. Remove the 2 nuts, turbocharger stay and 2 collars.
    Text in Illustration 
    *1
    Turbocharger Stay
    *2
    Collar

    NOTICE:
    Do not reuse the turbocharger stay.



10. REMOVE TURBOCHARGER SUB-ASSEMBLY
  1. Disconnect the vacuum hose.



  1. Remove the 3 nuts, turbocharger and gasket.


    A206459E02



11. REPLACE STUD BOLT (for Manual Transaxle)

HINT:
If a stud bolt is deformed or the threads are damaged, replace it.



    A206338E01
  1. Using an E8 "TORX" wrench, replace the 3 stud bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }



    A206339E01
  1. Using an E8 "TORX" wrench, replace the stud bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



    A206340E01
  1. Replace the 2 stud bolts labeled A shown in the illustration.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Using an E5 "TORX" wrench, replace the 2 stud bolts labeled B shown in the illustration.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }



12. REPLACE STUD BOLT (for Automatic Transaxle)

HINT:
If a stud bolt is deformed or the threads are damaged, replace it.



    A206341E01
  1. Using an E8 "TORX" wrench, replace the 3 stud bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }



    A206342E01
  1. Using an E8 "TORX" wrench, replace the stud bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



    A206343E01
  1. Replace the 2 stud bolts labeled A shown in the illustration.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Using an E5 "TORX" wrench, replace the 2 stud bolts labeled B shown in the illustration.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }