Home › ENGINE ยท 2AD-FHV › EMISSION CONTROL › EGR COOLER

EGR COOLER > REMOVAL

for Preparation Click here



1. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
  1. Remove the exhaust manifold converter sub-assembly (Click here).



2. REMOVE NO. 1 TURBO WATER HOSE (for Manual Transaxle)


A197508


3. REMOVE NO. 5 WATER BY-PASS HOSE (for Manual Transaxle)


A197509


4. REMOVE NO. 2 WATER BY-PASS HOSE (for Automatic Transaxle)


A197507


5. REMOVE EGR COOLER WITH PIPE ASSEMBLY


    A197511
  1. Disconnect the vacuum hose.



    A206446E01
  1. Remove the 6 bolts, 2 nuts and EGR cooler with pipe.
    Text in Illustration 
    *1
    Nut

  1. Remove the gasket from the No. 1 EGR pipe and the gasket from the EGR cooler.



    A206447E01
  1. Remove the O-ring from the EGR cooler.



6. REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY


    A206448E01
  1. Remove the 2 bolts, 2 nuts, No. 1 EGR pipe and gasket.
    Text in Illustration 
    *1
    Nut



7. REMOVE NO. 2 EGR VALVE ASSEMBLY


    A206449E01
  1. Remove the No. 2 EGR valve and gasket from the EGR cooler.