ANTI-LOCK BRAKE SYSTEM > ABS Warning Light does not Come ON |
| 1.CHECK CAN COMMUNICATION SYSTEM |
Check if the CAN communication system DTC is output (Click here).
| Result | Proceed to |
| DTC is not output | A |
| DTC is output | B |
|
| ||||
| A | |
| 2.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (ABS WARNING LIGHT) |
Select the Active Test, generate a control command, and then check that the ABS warning light operates.
| Tester Display | Test Part | Control Range | Diagnostic Notes |
| ABS Warning Light | Turns ABS warning light | ON or OFF | Observe combination meter |
|
| ||||
| OK | ||
| ||