Home › STEERING › POWER STEERING › POWER STEERING ECU (for RHD)

POWER STEERING ECU (for RHD) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable SRS system.



2. REMOVE UPPER INSTRUMENT PANEL
  1. Remove the upper instrument panel (Click here).



3. REMOVE POWER STEERING ECU


    C128908E03
  1. Disconnect the 4 connectors.

  1. Remove the 3 nuts and ECU.