C1225
| Any of the following is detected:
- While switching solenoid (SM1 or SM2) is ON, overcurrent continues for 0.15 seconds or more.
- While switching solenoid (SM1 or SM2) is OFF, an open circuit continues for 0.05 seconds or more.
- While switching solenoid (SM1 or SM2) is ON, an open circuit continues for 0.05 seconds or more.
- While switching solenoid (SM1 or SM2) is OFF, current continues to be applied for 0.1 seconds or more.
- Short to GND in the switching solenoid (SM1 or SM2) continues for 0.1 seconds or more.
- Switching solenoids SM1 and SM2 are shorted for 0.1 seconds or more.
| - SM1 or SM2 circuit
- Brake actuator assembly
|