CLUTCH PEDAL (for RHD) > INSTALLATION |
| 1. INSTALL CLUTCH PEDAL ASSEMBLY |
![]() |
Install the clutch pedal.
Install the 2 bolts and 2 nuts.
| 2. CONNECT CLUTCH START SWITCH CONNECTOR (w/ Entry and Start System) |
Install the clutch start switch with the nut.
Connect the clutch start switch connector.
| 3. CONNECT CLUTCH SWITCH CONNECTOR (w/ Cruise Control System) |
Install the clutch switch with the nut.
Connect the clutch switch connector.
| 4. INSTALL UPPER INSTRUMENT PANEL |
Install the upper instrument panel (Click here).
| 5. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Knee Airbag) |
![]() |
Connect the connector.
Install the driver side knee airbag with the 4 bolts.
| 6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag) |
![]() |
Attach the 8 claws to install the lower instrument panel finish panel.
Install the 2 screws.
| 7. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
![]() |
Attach the 3 claws to install the cover.
Install the 2 screws.
| 8. CHECK FLUID LEVEL IN RESERVOIR |
Check the fluid level in the reservoir (Click here).