Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER MOTOR

WASHER MOTOR > INSTALLATION

for Preparation Click here



1. INSTALL REAR WASHER MOTOR AND PUMP ASSEMBLY


B133126E01
  1. Install the washer motor and pump to the packing of the washer jar.



2. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    B133127E01
  1. Install the windshield washer motor and pump to the packing of the washer jar.



3. INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System)


    B133950
  1. Install the headlight cleaner motor and pump to the packing of the washer jar.



4. INSTALL WINDSHIELD WASHER JAR ASSEMBLY (w/o Headlight Cleaner System)


  1. Install the windshield washer jar with the 3 screws.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }



    E200473E01

  1. Connect the 2 connectors.

  1. Connect the 2 washer hoses to the washer motor and pumps.



    E200472E01
  1. for Large:
    Attach the 3 clamps.

  1. for Small:
    Attach the 2 clamps.



5. INSTALL WINDSHIELD WASHER JAR ASSEMBLY (w/ Headlight Cleaner System)


    E209799E01
  1. Install the windshield washer jar with the 3 screws.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

    Text in Illustration 
    *A
    w/o Hood Moulding
    *B
    w/ Hood Moulding

  1. Connect the 4 connectors.

  1. Connect the 3 washer hoses to the washer motor and pumps.



    E200470
  1. Attach the 4 clamps.



6. FILL UP WASHER JAR ASSEMBLY WITH WASHER FLUID
  1. Fill the washer jar with washer fluid.



7. INSTALL WASHER INLET SUB-ASSEMBLY


    B133129
  1. Install the washer inlet to the windshield washer jar.



    B133130
  1. Install the clip to the washer inlet of the washer jar.



8. INSTALL FRONT BUMPER COVER
  1. w/o Under Guard:

    1. Install the front bumper cover .

  1. w/ Under Guard:

    1. Install the front bumper cover .

  1. w/ Hood Moulding:
    Install the front bumper cover (Click here).



9. INSTALL FRONT FENDER LINER LH


    B133187
  1. Install the fender liner with the clip and fender liner retainer.

  1. Install the screw, nut and bolt.



10. INSTALL FRONT FENDER LINER RH

HINT:
Use the same procedures described for the LH side.



11. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH


B208332
  1. Install the splash shield with the nut, bolt and screw.



12. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH

HINT:
Use the same procedure described for the LH side.



13. INSTALL RADIATOR GRILLE PROTECTOR


B209174
  1. Install the 2 radiator grille protectors.



14. INSTALL CENTER HOOD CUSHION


B209173
  1. Install the hood cushion.



15. INSTALL RADIATOR SUPPORT OPENING COVER


B209240
  1. Install the radiator support opening cover with the 9 clips.



16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL