GENERATOR > INSTALLATION |
| 1. INSTALL GENERATOR ASSEMBLY |
![]() |
Confirm that the wire harness of the crankshaft position sensor is secured to the wire harness clamp bracket through the back of the rib of the timing chain cover.
![]() |
Install the generator with the 2 bolts.
![]() |
Install the wire harness clamp.
Install the wire harness clamp bracket with the bolt.
Connect the generator wire with the nut.
Install the terminal cap.
Connect the generator connector.
| 2. INSTALL FAN AND GENERATOR V BELT |
Install the belt (Click here).
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |