Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



2. REMOVE UPPER INSTRUMENT PANEL
  1. Remove the upper instrument panel (Click here).



3. REMOVE LOWER INSTRUMENT PANEL
  1. Remove the lower instrument panel (Click here).



4. REMOVE AIR DUCT


    E124265
  1. Detach the 2 claws and remove the air duct.



5. REMOVE AIR CONDITIONING UNIT ASSEMBLY (for Automatic Air Conditioning System)
  1. Remove the air conditioning unit .



6. REMOVE AIR CONDITIONING UNIT ASSEMBLY (for Manual Air Conditioning System)
  1. Remove the air conditioning unit .



7. REMOVE BLOWER UNIT ASSEMBLY


E127171
  1. Remove the 3 screws and blower.