DTC B2311 Driver Door Motor Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B2311 | When either condition below is met:
|
|
| 1.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (POWER WINDOW UP/DOWN) |
Perform the Active Test, using the intelligent tester to generate a control command, and then check the power window operation.
| Item | Test Details | Diagnostic Note |
| Power Window | OFF / UP / DOWN (OFF) | - |
|
| ||||
| OK | |
| 2.INITIALIZE POWER WINDOW CONTROL SYSTEM |
Initialize the power window regulator motor assembly (on the driver side) (Click here).
Check that the power window operates normally by opening and closing the window.
|
| ||||
| OK | |
| 3.CHECK WHETHER PARTS HAVE BEEN INSTALLED CORRECTLY |
Check that the power window components (on the driver side) are installed correctly.
|
| ||||
| OK | ||
| ||