DTC B2313 Glass Position Initialization Incomplete |
| DTC No. | DTC Detection Condition | Trouble Area |
| B2313 |
|
|
| 1.CHECK DTC OUTPUT |
Turn the ignition switch on (IG) and initialize the power window regulator motor (on the driver side) (Click here).
Turn the ignition switch off.
Wait for at least 10 seconds, and then turn the ignition switch on (IG).
Check whether the DTC output recurs.
| Display (DTC Output) | Proceed to |
| B2313 | A |
| No output | B |
|
| ||||
| A | ||
| ||