Home › TRANSMISSION ยท EB61 MANUAL TRANSAXLE › DIFFERENTIAL OIL SEAL

DIFFERENTIAL OIL SEAL > REPLACEMENT

for Preparation Click here



1. REMOVE FRONT DRIVE SHAFT ASSEMBLY
  1. Remove the front drive shaft assembly (Click here).



2. REMOVE TRANSMISSION CASE OIL SEAL


    C197642E01
  1. Using SST, remove the transmission case oil seal.

    SST
    09308-00010  



3. REMOVE FRONT TRANSAXLE CASE OIL SEAL


    C197644E01
  1. Using SST, remove the front transaxle case oil seal.

    SST
    09308-00010  



4. INSTALL TRANSMISSION CASE OIL SEAL
  1. Coat the lip of a new oil seal with MP grease.



    C199963E01
  1. Using SST and a hammer, tap in the transmission case oil seal to the manual transmission case.

    SST
    09608-32010  
    09950-70010   (09951-07100)

    Standard depth:
    -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

    NOTICE:
    Do not damage the oil seal lip.



5. INSTALL FRONT TRANSAXLE CASE OIL SEAL
  1. Coat the lip of a new oil seal with MP grease.



    C199964E01
  1. Using SST and a hammer, tap in the front transaxle case oil seal to the front transaxle case.

    SST
    09710-30050  
    09950-70010   (09951-07100)

    Standard depth:
    -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

    NOTICE:
    Do not damage the oil seal lip.



6. INSTALL FRONT DRIVE SHAFT ASSEMBLY
  1. Install the front drive shaft assembly (Click here).



7. INSPECT FOR OIL LEAK