Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY (w/ Hood Moulding)

HEADLIGHT ASSEMBLY (w/ Hood Moulding) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE FRONT BUMPER COVER
  1. Remove the front bumper cover (Click here).



2. REMOVE HEADLIGHT ASSEMBLY LH


    E156661
  1. Remove the bolt and 3 screws.

  1. Detach the clamp.

  1. Disconnect the connectors and remove the headlight.