Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for DVD)

DTC    62-41    Wrong Disc

DTC    62-42    Disc cannot be Read

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
62-41
An unsuitable disc is inserted.
  1. Disc
  2. Navigation receiver assembly
62-42
The disc cannot be read.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs (Click here).

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks in the disc.



NG
CHANGE DISC
OK


2.DISC CLEANING


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from inside to outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.


NEXT


3.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


4.RECHECK FOR DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    No DTC is output.



NG
Go to step 5
OK

END 

5.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc and recheck.

    1. Replace the disc with a normal one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same trouble code is output.

      OK:
      No DTC is output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END