Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for DVD)

DTC    62-78    DSP Error

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
62-78
An error occurs during the decode process (MP3/WMA).
Navigation receiver assembly

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs (Click here).

NOTICE:
  1. This code may be output even if there is no malfunction.
  2. If this code is output frequently, replace the navigation receiver assembly.

1.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


2.RECHECK FOR DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    No DTC is output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END