Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for DVD)

DTC    62-46    Scratched / Reversed Disc

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
62-46
Scratches or dirt is found on the disc surface or the disc is inserted upside down.
  1. Disc
  2. Navigation receiver assembly

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs (Click here).

1.CHECK THAT DISC IS INSERTED PROPERLY
  1. Check whether or not the disc is inserted upside down.

    OK:
    CD is properly inserted.



NG
INSERT DISC PROPERLY
OK


2.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks in the disc.



NG
CHANGE DISC
OK


3.DISC CLEANING


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.


NEXT


4.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


5.RECHECK FOR DTC
  1. Recheck for DTCs and check if the same trouble code is output.

    OK:
    No DTC is output.



NG
Go to step 6
OK

END 

6.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc and recheck.

    1. Replace the disc with a normal one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same trouble occurs again.

      OK:
      No DTC is output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END