Home › TRANSMISSION ยท K111F CVT › DIFFERENTIAL OIL SEAL (for RH Side)

DIFFERENTIAL OIL SEAL (for RH Side) > REPLACEMENT

for Preparation Click here



1. REMOVE CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY
  1. Remove the continuously variable transaxle (Click here).



2. REMOVE TRANSFER ASSEMBLY


    C126622
  1. except K111F:
    Remove the 6 nuts, 2 bolts and transfer from the transaxle.



    C130224
  1. for K111F:
    Remove the 6 nuts and transfer from the transaxle.



3. REMOVE CVT TYPE T OIL SEAL (OUTER)


C095771E01
  1. Using a screwdriver with vinyl tape wound around the tip, pry out the oil seal.
    Text in Illustration 
    *1
    Vinyl Tape

    NOTICE:
    Be careful not to damage the housing.



4. REMOVE CVT TYPE T OIL SEAL (INNER)


C103312E01
  1. Using SST, tap out the oil seal.

    SST
    09308-00010  

    NOTICE:
    Be careful not to damage the housing.



5. INSTALL CVT TYPE T OIL SEAL (INNER)


    C095154E01
  1. Using SST and a hammer, tap in a new oil seal.

    SST
    09950-60010   (09951-00390)
    09950-70010   (09951-07200)

    Standard depth:
    -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

    NOTICE:
    Do not damage the lip of the oil seal.

  1. Coat the lip of the oil seal with MP grease.



6. INSTALL CVT TYPE T OIL SEAL (OUTER)
  1. Coat the lip of a new oil seal with MP grease.



    C103350E01
  1. Using SST and a hammer, tap in the oil seal.

    SST
    09316-60011   (09316-00011)

    Standard depth:
    4.5 to 5.5 (0.177 to 0.217 in.)

    NOTICE:
    Do not damage the lip of the oil seal.



7. INSTALL TRANSFER ASSEMBLY


    C126622
  1. except K111F:
    Install the transfer to the transaxle with the 6 nuts and 2 bolts.

    Torque:
    69 N*m{ 700 kgf*cm , 51 ft.*lbf }



    C130224
  1. for K111F:
    Install the transfer to the transaxle with the 6 nuts and 2 bolts.

    Torque:
    69 N*m{ 700 kgf*cm , 51 ft.*lbf }



8. INSTALL CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY
  1. Install the continuously variable transaxle (Click here).