DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL > REMOVAL |
| 1. DRAIN DIFFERENTIAL OIL |
![]() |
Using a 10 mm socket hexagon wrench, remove the rear differential drain plug and gasket, and drain the oil.
Install a new gasket to the rear differential drain plug.
Using a 10 mm socket hexagon wrench, install the rear differential drain plug and gasket.
| 2. REMOVE REAR DIFFERENTIAL CARRIER SUB-ASSEMBLY |
Remove the differential carrier assembly (Click here).
| 3. REMOVE REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL |
![]() |
Using SST, tap out the 2 oil seals.