Home › ENGINE ยท 3ZR-FAE › ENGINE CONTROL SYSTEM › KNOCK SENSOR

KNOCK SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL KNOCK SENSOR


    A173968E02
  1. Install the knock sensor with the bolt.

    Torque:
    21 N*m{ 214 kgf*cm , 15 ft.*lbf }

    NOTICE:
    Make sure that the knock sensor is in the correct position.



    A173135
  1. Connect the knock sensor connector.



2. INSTALL INTAKE MANIFOLD
  1. Install the intake manifold (Click here).