Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for HDD)

DTC    B15E1    Media Malfunction

for Preparation Click here


DESCRIPTION

This DTC is output when signals from the disc in the navigation receiver assembly cannot be read.

DTC Code
DTC Detection Condition
Trouble Area
B15E1
One of the following conditions is met:
  1. An unsuitable disc is inserted.
  2. The disc cannot be read.
  3. The disc cannot be read because of dirt or scratches.
  4. The disc cannot be read because it is inserted upside down.
  1. Disc
  2. Navigation receiver assembly

INSPECTION PROCEDURE

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks in the disc.



NG
CHANGE DISC
OK


2.CHECK DISC


    I100151
  1. Check the disc.

    OK:
    The disc is clean.

    HINT:
    If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.



NG
DISC IS FAULTY
OK


3.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with another and recheck.

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    No DTC is output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END