Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for HDD)

DTC    B15B8    Harddisk Malfunction

for Preparation Click here


DESCRIPTION

The navigation receiver assembly stores this DTC when there is an HDD initialization error or an HDD read/write errors occur more than a certain number of times.

DTC Code
DTC Detection Condition
Trouble Area
B15B8
Either condition is met:
  1. Initialization error.
  2. HDD read/write errors occur more than a certain number of times.
Navigation receiver assembly

INSPECTION PROCEDURE

1.CHECK HDD STATUS


    E178224
  1. Enter the "Failure Diagnosis" (Click here).

  1. Press "HDD Check".

    1. Check HDD status.

      OK:
      The result is displayed "OK".



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK


2.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.
    Result 
    Result
    Proceed to
    No DTCs are output
    A
    B15B8 is output
    B

    HINT:
    The HDD may be damaged even though B15B8 is not output.



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)