Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM30B0U _51 Engine / Hybrid System _008971 2AR-FE ENGINE CONTROL _0049661 CAMSHAFT POSITION SENSOR A

2AR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 2.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)

A195076

a.

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor.


Hide 3.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)

A195077

a.

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor.