Home › Engine / Hybrid System › 2AR-FE FUEL › FUEL FILTER
RM30B0U _51 Engine / Hybrid System _009210 2AR-FE FUEL _0050318 FUEL FILTER A

2AR-FE FUEL  FUEL FILTER  REPLACEMENT  


CAUTION / NOTICE / HINT

NOTICE:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereEngine / Hybrid System>2AR-FE FUEL>FUEL SYSTEM>PRECAUTION


PROCEDURE

Hide 1.REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP

Hide 2.REMOVE NO. 1 FUEL SUB-TANK

Hide 3.REMOVE NO. 1 FUEL SUCTION SUPPORT

Hide 5.REMOVE FUEL FILTER ASSEMBLY

a.
A195883

Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly from the fuel filter assembly.

NOTICE:

Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the fuel pressure regulator assembly and fuel filter assembly.



b.

Remove the 2 O-rings.


Hide 6.INSTALL FUEL FILTER ASSEMBLY

a.
A195884
0.754,1.653 0.919,1.813 0.166,0.16 10 *1 0.833,1.131 0.833,1.64 false 1.758,1.41 1.758,1.537 1.758,1.537 0.833,1.537 false
*1 New O-Ring


Apply a light coat of gasoline to 2 new O-rings and install them to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly to the fuel filter assembly.


Hide 8.INSTALL NO. 1 FUEL SUCTION SUPPORT

Hide 9.INSTALL NO. 1 FUEL SUB-TANK

Hide 10.INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP