Home › Engine / Hybrid System › 2AR-FE FUEL › FUEL PUMP
RM30B0U _51 Engine / Hybrid System _009210 2AR-FE FUEL _0050319 FUEL PUMP A

2AR-FE FUEL  FUEL PUMP  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repairs" after replacing the fuel pump.

Click hereEngine / Hybrid System>2AR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


PROCEDURE

Hide 1.INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP

a.

Install a new gasket to the fuel suction tube assembly with pump.


b.
A201330
0.531,1.073 1,0.917 1,0.917 1.167,0.917 false 1,2.833 1.167,2.833 1.167,2.833 1.583,3.167 false 1.188,0.813 1.5,0.969 0.313,0.156 10 *1 0.833,2.729 1.146,2.885 0.313,0.156 10 *2 0.833,0.51 1.146,0.667 0.313,0.156 10 *a
*1 Paint Mark
*2 Fuel Hose
*a Top of Vehicle


Connect the fuel hose with the paint mark facing towards the top of the vehicle, and then secure the clip.


c.

Install the fuel suction tube assembly with pump into the fuel tank assembly.

NOTICE:

Do not damage the fuel suction tube assembly with pump.



Hide 2.INSTALL FUEL TANK VENT TUBE SET PLATE

a.

Install the fuel tank vent tube set plate and tube clamp with the 8 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 3.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.
A198719

Connect the fuel tank main tube sub-assembly with the tube joint clip.

NOTICE:
·
A124131
0.969,0.76 0.729,0.385 0.729,0.385 0.573,0.385 false 1.656,0.573 1.729,0.198 1.729,0.198 1.896,0.198 false 1.625,1.083 2.094,1.479 2.094,1.479 2.26,1.479 true 0.979,1.25 0.573,1.5 0.573,1.5 0.99,1.396 true 1.104,3.24 1.375,3.094 1.375,3.094 1.542,3.094 false 2.438,3.271 2.75,2.813 2.75,2.813 2.917,2.813 true 0.802,3.406 1.031,3.75 1.031,3.75 1.198,3.75 true 0.375,0.313 0.594,0.49 0.219,0.177 10 *1 1.927,0.135 2.146,0.313 0.219,0.177 10 *2 2.313,1.406 2.531,1.583 0.219,0.177 10 *3 0.406,1.438 0.625,1.615 0.219,0.177 10 *4 1.573,3.031 1.792,3.208 0.219,0.177 10 *3 2.948,2.75 3.167,2.927 0.219,0.177 10 *5 0.813,4.365 1.031,4.542 0.219,0.177 10 *a 2.375,4.313 2.594,4.49 0.219,0.177 10 *b 1.208,3.667 1.427,3.844 0.219,0.177 10 *5
*1 Fuel Tube Joint
*2 Fuel Tube
*3 Tube Joint Clip
*4 O-Ring
*5 Collar
*a CORRECT
*b INCORRECT


Check that there are no scratches or foreign objects on the connecting parts.

·

Check that the fuel tube joint is inserted securely.

·

Check that the tube joint clip is on the collar of the fuel tube joint.

·

After installing the tube joint clip, check that the fuel tube joint cannot be pulled off.

·

Be careful not to damage the clip. If the clip is damaged, replace it.