Home › Engine / Hybrid System › 2AR-FE FUEL › FUEL PRESSURE REGULATOR
RM30B0U _51 Engine / Hybrid System _009210 2AR-FE FUEL _0050322 FUEL PRESSURE REGULATOR A

2AR-FE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereEngine / Hybrid System>2AR-FE FUEL>FUEL SYSTEM>PRECAUTION


PROCEDURE

Hide 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly.


Hide 3.INSTALL NO. 1 FUEL SUCTION SUPPORT

Hide 4.INSTALL NO. 1 FUEL SUB-TANK

Hide 5.INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP