1.INSTALL NO. 2 AMPLIFIER BRACKET
Install the No. 2 amplifier bracket with the 2 screws.
2.INSTALL NO. 1 AMPLIFIER BRACKET
Install the No. 1 amplifier bracket with the 2 screws.
3.INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
| *1 | Guide |
Attach the 2 guides to temporarily install the stereo component amplifier assembly with bracket.
Install the stereo component amplifier assembly with bracket with the 3 bolts.
Tighten the bolts in the order shown in the illustration.
Connect the connector.
4.INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
5.INSTALL REAR SEAT ASSEMBLY
for LH:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY(for LH Side)>INSTALLATION
for RH:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY(for RH Side)>INSTALLATION
6.INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE
7.INSTALL REAR FLOOR FINISH PLATE (for Compact Spare Tire)
8.INSTALL REAR DECK TRIM COVER (for Full Size Spare Tire)
9.INSTALL DECK BOARD ASSEMBLY
10.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
11.INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)
12.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
13.INSTALL REAR DOOR SCUFF PLATE RH